Diverting pressurized water to the oil to water cooler has
NO impact on the overall water flow rates.

Ray Richardson
Powersport

Mike Wills wrote:

  Didnt mean to imply the oil-water cooler did impact the flow rate. But if
you start with 51gpm for the system (I'm assuming this means 10gpm to the
oil cooler and 41gpm to the engine) and then reduce that to 31gpm with a 2
pass rad (still 10gpm to the oil cooler and now only 21gpm to the engine) I
can see why there may be a cooling problem. Other folks here  (who arent
using the oil-water cooler) have successfully used 2 pass radiators as well
as other flow restrictive configs without a problem while using the stock
Mazda water pump and pulleys.

  So I'm suggesting that perhaps your cooling system is more sensitive to
flow restriction in the radiator due to the 10gpm that gets diverted away
from the engine to the oil cooler. How else would you explain the fact that
the 2 pass works for others but didnt work for you?

  What is the core size on the Powersport radiator?

Mike Wills-- 

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org