Subject: Ross PSRU - bad!!
From: ACRE NL
Date: 8/6/2001, 7:43 PM

Finn Lassen wrote:

I removed my Ross drive after 160 hours. Sun gear is badly pitted
(galled?). Oddly enough only one of the 4 planet gears is similarly
pitted.

Sure sign of a non concentric sun gear. Machining error.

I also found a thin piece of steel in there. Too big to have gotten in
there through the oil feed.

So far I've only removed the input shaft/sun gear. Need to figure out
how to remove the planet carrier so I can look at the ring gear.

I'm sincerely disappointed. If anybody sees Chris Ross, tell him he
better hire a body guard.

I paid $3,000 for that piece of sh...!

I have no idea on how I can get this fixed. Replacing the planet gears
is probably not a big deal, but the input shaft with the sun gear? Then
there's adding a thrust bearing on the other side of the input shaft. I
should probably toss the whole thing and get Tracy's. Unfortunately, in
addition to the cost, that'll mean I'll have to move my radiators a bit
as well as making a new oilcooler mount (hope it'll fit).

As a point of curiosity, how many more hours do you figure I can get out
of the drive as is before it explodes?

Finn

Problem with the Ross as I suspected Finn. Good thing you took it
apart. Sell it to somebody with a machine shop that can fix it.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Finn-Lassen-SunGear.jpg