Russell Kent wrote:
Paul,
That Mecanair chart has to be wrong. It is showing a best economy of 253 g/Hph
which is 0.56 lb/HpHr, and a best power economy of 293 g/Hph = 0.65 lb/HpHr;
truly awful.
Russell Kent
The .65 is quite typical of any aircraft engine under full power climb
out. I don't know how they leaned the engine so .56 is quite believably
if you don't lean it properly. Much depends on altitude and percentage of
power. Things like a variable pitch prop helps greatly as you
can optimize the pitch and manifold pressure for best BSFC
at a lower cruise RPM.
BTW John Slade, HP is directly proportional to absolute manifold
pressure all other things being equal like intake charge temperature.
If a turbo engine is generating 200 HP at 5 psi boost or 20 psi
absolute it will generate 250 HP at 25 psi absolute and 10 psi
boost. To achieve this the key is having a big enough intercooler
to keep the intake manifold temperature down and the air density up.
As you increase the boost the charge temperature wants to go up
due to compressor effects.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org