mike h wrote:
Just got off the phone with Dave Nugent of MSCW - looks like a no-go. He had
mentioned it to the track reps on Friday (re: Paul's email) and the reply
was that they did not want to do anything to disturb the local community so
no airplanes flying over or near the track at all.
I also spoke to a person at the track regarding the pitrow-paddock gate
width (I know this guy from many weekends of flagging races up there) and he
had been told at one point that the FAA forbid anyone to land there sometime
in the mid 70's (Track closed in '74 I believe).
MNAO is very hands-off with this event - they want nothing whatsoever to do
with it for liability reasons. Basically I think the various officials
coming are there on their own, not as 'assigned' reps of MNAO :(
The only good news is that the gate width is 30ft +.
Dave is going to call me back if anything comes up about it in their next
meeting.
Ed, if you would like to ride up, or still want to fly into Danville, let me
know and we can arrange something. The event should be very interesting, as
it has been in the past. Usually they do at least 1 rebuild on site (last
year it was KD rotary and Pettit) in a seminar format.
Mike Harrington
Way less noise than any car race ever could be.
It is not illegal to fly over anywhere at 1000 AGL.
A couple of passes ought to do it. The sound alone
will verify the rotary. Just get it coordinated with the announcer
so people on the ground know it is a rotary powered airplane.
It could then be on view at the airport for those
interested.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org