OK, it's 0030 EST and I just got to check all my email. :(
Here's the deal -
given the FAA says it's OK (done)
obstacles are:
-MSCW permission
-VIR permission
-insurance
Someone needs to:
-call local Mazda dealers and/or MNAO for insurance sponsorship
-call MSCW
-call (possibly conference call w/ MSCW) VIR
I'd prefer to know what we can expect for insurance support, whether
your
flying insurance (don't know if you have any, showing regulatory
ignorance
here) would cover off-field, etc. before we approach VIR. Hit them with
all
the answers and MSCW and MNAO on board and I can't see how they'd refuse
:)
I can/will call MSCW.
I will ask my SCCA racing compatriots who to talk to at VIR (a bit of
politickin probably required)
And, we need a radio.
Times would be somewhat of an issue - Ed, can you fly at night? You'd
probably have to arrive around 0800 and leave after 1800. Of course, you
could arrive Saturday night at 1800 ish, and we could put you up
somewhere
either in Danville or at a member's home, then return on Sunday. The
driver's school is both days. Expo on Sunday only.
Also, what's your wingspan? I'm 99% sure you could make it into the
south
paddock, but the spectators would all be in the North paddock. Need
span to
see if we can get you through the gate :)
Another issue is fuel - there is usually 104 race gas and Cam-2
available at
the track. Usually no 93 pump gas. Your requirements/quatities?
Alternate would be danville airport - I will have a cell (as well as the
radio) so we could get someone out there to give a ride in.
Was joking (mostly) about the 'toll' (ride) - but I might come out your
way
and take you up on that later :D
Let's make it happen!
Mike Harrington
Rob Weinstock wrote:
You should get Mazda North America interested in this, and let them tackle
these problems. They will have more influence.
Rob
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org