Subject: Mystery engine of the month.
From: ACRE NL
Date: 8/7/2001, 4:58 PM


<< Major break through in geared four cycle air craft piston
 > > engines. No exhaust valves! Still not as good as a rotary.
 > >
 > > Paul Lamar

 tom jelly wrote:
 >
 > That is a really neat setup.  Any more pictures?
 >
 > Tom


 That would be cheating Tom. First you have to identify it :-)
 Note the prop runs at half crankshaft speed.

 Paul Lamar

I don't remember where I saw it, but I think it's a model airplane engine.
Lynn E. Hanover.


We have a winner already. Scaled up I think it would make a good ultra
light engine. Over head rotary valve piston engines have been built before.
Felix Wankel got his start by designing a rotary valve compact V8 
for torpedoes.

The big problem has been sealing between the combustion chamber and 
the rotary valve. The combustion pressure tends to lock up the rotary 
valves in previous designs.

This design improves the situation as the rotary
valve is held in close relation to its bore by ball bearings.
The only problem I can see is cooling the cylinder and the
combustion chamber. 

The design is in its infancy. It is very ingenious however.

http://www.rcvengines.com/

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

RCV-120sp.jpg