Subject: Ross PSRU - bad!! What Symptoms??
From: ACRE NL
Date: 8/7/2001, 12:32 PM


Finn Lassen wrote:

I removed my Ross drive after 160 hours. Sun gear is badly pitted
(galled?). Oddly enough only one of the 4 planet gears is similarly
pitted.

SNIP

 . Unfortunately, in
addition to the cost, that'll mean I'll have to move my radiators a bit
as well as making a new oilcooler mount (hope it'll fit).

As a point of curiosity, how many more hours do you figure I can get out
of the drive as is before it explodes?

Finn


Ed Anderson wrote:

 Finn,

    Sorry to hear about your drive.  Ross's gear boxes are such a hodge
podge, some seem to give adequate service and operate hundreds of hours then
others never work correctly from the git-go.

    What type symptoms make you suspect the gear box.  Noise? Feel? Oil
temp?
Others of us with the Ross would like to know.

Ed Anderson


Well, Ed. My RV-3's annual is due this month. It was high time to send the prop
back to Clark to have it finished. I had promised myself to inspect the re-drive
around 150 hours. I haven't really noticed any symptoms. Still don't know if that
"tight spot" I noticed the other day was from a stuck apex seal or from a piece of
junk in the gears.

In the process of replacing the oil pan plug with a magnetic one, I drained about
1 gallon of oil and fished around it with a magnetic pick-up tool and didn't catch
any metal.

Finn

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org