Subject: Ross PSRU - bad!!
From: ACRE NL
Date: 8/7/2001, 1:23 PM

Rick Girard wrote:

I too am an owner of a Ross POSRU, I just haven't opened it up yet.  As
I've said before, mine came with over 3/8" end play on the input shaft
and it's not getting near my new Hayes engine until it's torn down and
fixed.

Before you guys get emotionally exhausted, look up the number of the
nearest machine shop that specializes in making gears, takes the whole
thing to them and let them inspect it and quote you a price to fab
whatever it takes to fix it. Tell them your boat is out of the water
until this is done.  If the price seems too high compared to one of
Tracy's new boxes, see if you can get someone to pay you whatever the
difference is and give Tracy a call.

I priced out the new six pinion set from the local Ford dealer and it
was less than $300.  That, too is too cheap to make putting ANY
questionable parts back in service.
Think how stupid you'd feel if you end up having to look your maker in
the eye and confess that you didn't think your own life was worth 3
grand.  Just my 2C, but I haven't learned near enough from you guys yet
and I'm not ready to see another flier go down because of somebody's
criminally bad workmanship.

Rick Girard

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org