Two more questions guys.
A: Are your planet carriers bolted rigidly into the unit?
Ford designed those planet carriers to float and self align in slots in
the housing. Tracy does not subscribe to this design philosophy
as he believes he can line things up perfectly. Tracy noticed
evidence of the planet carrier moving around in the slots
and he attempted to epoxy it in place on his original Ross gear box.
Not bolted, mine is press fitted. I just pulled it out. On closer
examination all four planet gears are similarly worn (not nearly as much as
the sun gear). Except for one, which is severely worn on the backside!
Weird!
B: Are your ring gears welded to the ring gear bulkhead?
Ford designed those ring gears to float on the bulkhead splines.
In some Ross boxes the ring gear was welded to the bulkhead.
Don't know how the ring gear is in it's native state. Attached picture into
the ring gear shows some discoloring that could indicate a weld.
Also shows the poor lubrication scheme. The thin hole is in and the bigger
out.
Finn
That bulkhead is news to me. Never saw one of those before. Anybody else
have a bulkhead like that? Can you wiggle the ring gear around on it Finn?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org