Two more questions guys.
A: Are your planet carriers bolted rigidly into the unit?
Ford designed those planet carriers to float and self align in slots in
the housing. Tracy does not subscribe to this design philosophy
as he believes he can line things up perfectly. Tracy noticed
evidence of the planet carrier moving around in the slots
and he attempted to epoxy it in place on his original Ross gear box.
Chuck Harbert had the same wear patterns on his Ross sun and planet
gears and he felt he cured the problem by freeing up the planet
carrier to float and self align as Ford designed it. He did
this by boring out the planet carrier bolt holes over size.
B: Are your ring gears welded to the ring gear bulkhead?
Ford designed those ring gears to float on the bulkhead splines.
In some Ross boxes the ring gear was welded to the bulkhead.
In both of these cases it sounds like the gears are
mis aligned.
One of the features of any planetary gear set is they do indeed tend
to self align as all gear separation forces are contained in the ring
gear. Unless of course they are helical gears and in that case there is
an axial or thrust separation force that must be accommodated
in the housing. Ross never provided that capability and relied
instead on the Mazda thrust bearing.
Send me your entire gear boxes guys and I will take a look at them
if you wish. Chuck if you pick me up at the Phoenix airport next weekend
I can come over and take a look.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org