Scott Speirer wrote:
Further to the info on the Turbonetics upgrade, I called them again to check on the price
of their manual controller. Their variable Boost Control regulator, (VBC), sells for $60.
This VBC is setup to work with a dual-port actuator. The stock actuator on the '91 RX-7 is
a single-port actuator. Their price for a dual-port actuator is $80. I confirmed with
tech I talked to that the VBC is just a pressure valve controlled with a knob. One
pressure line connects it to the intake manifold, and another pressure line to the second
fitting on a dual-port actuator.
I asked them what the boost was for the stock turbo at 6000 rpm. The tech thought it was
about 7.5 psi. (This is assuming all stock installation, and the car near sea level.)
With the TO4B V-1/V-2 upgrade, I expressed my concern/need to be able to manually control
the boost level and keep the boost down to 7 psi at 6000 rpm. He thought it was possible.
(I didn't tell him I was putting all this in an aircraft.)
My goal is to have the engine perform at altitudes up to 12,000 or 13,000 ft the same as at
sea level. And, I'd like the turbo to behave pretty much like the stock version at
sealable and produce 14.7 + 5 psi = 19.7 psi absolute, and also produce that same 19.7 psi
absolute at 13,000 ft.
Ed - thanks for your comments. I'll take a closer look at the H-3 trim compressor map.
Scott
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org