Finn Lassen wrote:
I removed my Ross drive after 160 hours. Sun gear is
badly pitted
(galled?). Oddly enough only one of the 4 planet gears
is similarly
pitted.
SNIP
. Unfortunately, in
addition to the cost, that'll mean I'll have to move my
radiators a bit
as well as making a new oilcooler mount (hope it'll fit).
As a point of curiosity, how many more hours do you
figure I can get out
of the drive as is before it explodes?
Finn
Ed Anderson wrote:
Finn,
Sorry to hear about your drive. Ross's gear boxes are
such a hodge
podge, some seem to give adequate service and operate
hundreds of hours then
others never work correctly from the git-go.
What type symptoms make you suspect the gear box.
Noise? Feel? Oil
temp?
Others of us with the Ross would like to know.
Ed Anderson
I had no symptoms whatsoever. PSRU oil temp, noise and backlash have
never
changed. I just discovered it because I had it apart to find and fix the
rear oil leak.
Chuck Dunlap
Don Dunbar wrote:
The oil temperatures that the PRSUs run with engine lubrication worry me as
it is my experience that gears fail if run at 100c and above. Most gear
manufacturers like to have more like 60c. We have run gear boxes at 100c and
above with consistent failures. The manufacturer told use this was common
and we should not be concerned that this was the cause of the failures. We
decided to install a heat exchanger on these units our self. After the
modification we had no more failures.
Before the heat exchanger was added we tried many types of oil to resolve
the problems, syntectics and many high temp oils.The manufacturer of this
gearbox has now added a heat exchanger. At the high temperatures oil seals
and high speed input shaft where a common. the high speed shaft only run at
2300 rpm not 6500 rpm. We are also use engine oil in these boxes that has
engine contamination. I would like not use the engine lube system.
Regards Don
I am with you Don. I think it would be great if your box had a separate
oil supply.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org