Subject: Ross PSRU - bad!! What Symptoms??
From: ACRE NL
Date: 8/8/2001, 9:40 AM


2300 rpm not 6500 rpm. We are also use engine oil in these boxes that has
engine contamination. I would like not use the engine lube system.
Regards Don

I am with you Don. I think it would be great if your box had a separate
oil supply.

Paul Lamar


You guys keep talking about contamination between engine and PSRU. I don't get it.
My oil path is from oil pan, screened pickup, oil pump, oil filter, cooler, then
split between engine and PSRU. Doesn't the oil filter filter out any
"contamination"?

Finn

Revision. Oil pan, screened pickup, oil pump, cooler, oil filter.

Small metal particles could get through the screened pickup pass through
or partiall clog the cooler, clog the filter, bypass opens and ruins the
bearings.

Paul Lamar

Not on my airplane. It's exactly as I described it.
I think it would take an awful lot of small metal particles to clog an oil filter. Has
quite a bit of surface.

Finn

BTW it could also jam the pump or wear it out.

Does your oil cooler line come out of the front cover or does it not? 
If it comes out of the front cover the first thing the oil does 
after it comes out of the pump is go through the oil cooler.

Study this diagram again Finn.

BTW Kind of dumb to measure the oil temp in the pan. Sorry Ray :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

oilcircu2.jpg