2300 rpm not 6500 rpm. We are also use engine oil in these boxes that has
engine contamination. I would like not use the engine lube system.
Regards Don
I am with you Don. I think it would be great if your box had a separate
oil supply.
Paul Lamar
You guys keep talking about contamination between engine and PSRU. I don't get it.
My oil path is from oil pan, screened pickup, oil pump, oil filter, cooler, then
split between engine and PSRU. Doesn't the oil filter filter out any
"contamination"?
Finn
Revision. Oil pan, screened pickup, oil pump, cooler, oil filter.
Small metal particles could get through the screened pickup pass through
or partiall clog the cooler, clog the filter, bypass opens and ruins the
bearings.
Paul Lamar
Not on my airplane. It's exactly as I described it.
I think it would take an awful lot of small metal particles to clog an oil filter. Has
quite a bit of surface.
Finn
BTW it could also jam the pump or wear it out.
Does your oil cooler line come out of the front cover or does it not?
If it comes out of the front cover the first thing the oil does
after it comes out of the pump is go through the oil cooler.
Study this diagram again Finn.
BTW Kind of dumb to measure the oil temp in the pan. Sorry Ray :-)
Paul Lamar
When I moved my oil filter I mounted it directly on the front cover. High quality water pipe
90 degree elbow from Home Depot :) into a home made 1/2" plate onto which the stock oil
filter adapter bolts. From the 1/2" plate an 45 degree AN #10 fitting and hose to oil
cooler. From there a short hose to standard engine block input. Home made 1/2" plate on top
of engine where oil filter adapter used to sit. Use this plate for line to PSRU, temp and
pressure sensors as well.
Why? Because it simplified the plumbing, as well as being cheap. I think I have less than 3'
of oil hose. Let's not get into the fact of hanging the oil cooler under the oil pan so it
doesn't drain when changing oil :)
Nothing wrong with measuring oil pan temp. Compare that with temp of oil going into engine
and you know how well the oil cooler works.
Finn
Good idea Finn on the oil filter. Also good idea on measuring the pan temp AND
the temp out of the cooler. One can never have too much data.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org