Don Dunbar wrote:
Hi Fin,
As I see it is there are different oils for different gobs.
1# the engine has by pass which contaminates the oil and with age reduces it
ability to lubricate.
2# Engine oil has many elements to it but it brakes down under high
temperatures.
3# Race cars that are constantly running at high temps as the rotary in an
aircraft situation use special oils to handle the extreme heat. look to
www.redlineoil.com this is from memory so let me know if this is not the web
site.
4# We need to think of our installations with the following in mind. We have
adapted and auto mobile engine to an aircraft with a drive unit that has
high speed input input with high torque. This does not happen in a auto
engine as all gears have small loads compared with gear contact area.
The auto gearbox has always been separate to the engine and this is for good
reason and that is the heat factor.
5# As I stated earlier we have had many failures in the marine industry with
high temps on gears.
In conclusion I believe that it is bad practice to run gears of any kind at
the engine oil temperature's. Has any one run these PSRUs with there own
splash feed lube system with good gear lubrication for high temperature's.
The temperature may be the same as engine fed systems.
Regards Don
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org