Subject: Ross PSRU - bad!!
From: ACRE NL
Date: 8/8/2001, 8:12 AM


Don Dunbar wrote:

Paul are you talking about machining in the Ross housing to fit the
square
teeth on the planetary gear carrier.
Regards Don

Yes. Very important to have a bit of clearance in there so the planet
carrier can self align and equalize the load on the pinion gears.

Paul Lamar

I've never tried to measure the amount of play on my gearbox, but I estimte
there is approx 1/64 - 1/32" (could be slightly more) of play between the
teeth and slot.  You can wiggle it from side to side, just bearly.

Ed Anderson

I would guess that is enough.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org