Subject: Ross PSRU - bad!! What Symptoms??
From: ACRE NL
Date: 8/9/2001, 3:15 PM


 > > > Ed Anderson wrote:

 Finn,

    Sorry to hear about your drive.  Ross's gear boxes are such
a
hodge
podge, some seem to give adequate service and operate hundreds
of
hours then
others never work correctly from the git-go.

    What type symptoms make you suspect the gear box.  Noise?
Feel?
Oil
temp?
Others of us with the Ross would like to know.

Ed Anderson


Well, Ed. My RV-3's annual is due this month. It was high time to
send
the prop
back to Clark to have it finished. I had promised myself to inspect
the
re-drive
around 150 hours. I haven't really noticed any symptoms. Still don't
know if that
"tight spot" I noticed the other day was from a stuck apex seal or
from
a piece of
junk in the gears.

In the process of replacing the oil pan plug with a magnetic one, I
drained about
1 gallon of oil and fished around it with a magnetic pick-up tool
and
didn't catch
any metal.

Finn


Thanks, Finn

    That what makes it a little scary, no noticeable symptoms.  I would
like
to think that you would feel some grittness, catching - or something
when
you pull the prop through. Also, no metal in the oil pan, guess it could
have stayed in the PSRU as not much pressure to force it down the drain
to
the oil pan (if it can find the drain in the gear box).

   Sounds like you either have to get this one fixed or go with Tracy's.
I'm facing the same thing - its not "if", its a case of "When".  I just
hope
I can get 400+ hours like Tracy's

Ed

Forgot to mention in my earlier post that after discovering the sun gear
galling by visual inspection, I did find the missing metal of the sun gear
stuck to the magnetic drain plug in my oil pan.  A very worthwhile thing to
have.  If it were not for lack of time (a lousy excuse) I would also have a
chip detector in the redrive oil return line as Bill Freeman wisely
suggested.

Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com

Aluminum particles can also cause problems. Ken Welter suggested
a screen in the return line in a message about three weeks ago. 

Paul Lamar

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org