BTW Kind of dumb to measure the oil temp in the pan. Sorry Ray :-)
Paul Lamar
Yvon Cournoyer wrote:
Why do you say that Paul? Please elaborate. Yvon.--
The oil in the pan has been heated by the engine. What you are really interested
in is how well your oil cooler is working. It is not bad to measure the oil
temp in the pan but you should be measuring the oil temp out of
the cooler before it goes in to the engine as well.
BTW guys check the run out or concentricity of the ring gear with a dial indicator.
It occurs to me this could also cause the wear patterns we are
seeing. This can be done with out taking the prop shaft out of the Ross
casing. This could also cause the planet carrier to move around excessively
such as Tracy reported in Ron Gowans case.
Here is a picture of Tracy's input shaft and damper plate. It would be ideal
if you replaced the Ross parts with something like this. As I recall Tracy
said this shaft was made from stock Ford parts. Tracy will have to adjust
the length and supply a pilot extension to fit the Ross.
If he wanted to of course. I am not trying to force him into anything :-)
If you don't want to spend this much money there is a manual transmission
input shaft somewhere that will fit the same marine damper spring plate
spline that Ross supplies. Try a Chev V8 manual transmission for a Camaro.
As I recall there are only two or three different versions of these splines
world wide. I think they are an SAE standard. Just take your spring plate
to the junkyard and see what it fits.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org