Scott Speirer wrote:
Paul and Group,
I bought a new Ross Aero 2.85:1 gear reduction drive unit several months ago.
Subsequent to this purchase, I have learned more about the 13B Turbo engine and also
more about propellers. As a result of this better understanding, I've realized that
for my particular application, a 2.17:1 reduction ratio would be much better. I have
decided to put up for sale my 2.85:1 redrive.
I am asking $2850 with my starter included. (This is the price I paid Ross Aero
without my starter.) Without my starter included, I am asking $2600. I can be
reached at sspeirer@sprynet.com, or by phone at (623) 434-5907.
After I've sold the redrive, I am thinking of ordering a 2.17:1 redrive from Tracy.
Here is my rationale. Keep in mind two major differences between my aircraft, which
is a two-seat gyroplane, and many of your aircraft, which are relatively fast flying
airplanes. My gyroplane has a maximum design airspeed of 90 mph, and a cruise speed
of maybe 70 mph. Many Vans RV's have a cruise speed of about 200 mph, from what I
gather from this newsletter. I have a propeller diameter limit of 68 inches. Many
of you with airplanes can use propellers with a much larger diameter.
Mazda SAE paper 900036 was a real eye-opener for me, especially figure 2, which shows
the power and torque curves for bothy the normally aspirated 13B and the singly
turbocharged 13B. The 13B N/A first reaches it peak power of 160 HP at 7000 rpm,
while the 13BT reachs that same power level at roughly 4000 rpm, and also with
significantly more torque. This is all with only about 5 to 7 psi boost. The 13BT
first reaches its maximum power of 200 HP at 6500 rpm. I don't want or need more
than 200 HP.
I've talked to both the people at Warp Drive and Sensenich, and they've indicated
that their 68" propellers aren't really effective below 2200 rpm. I really didn't
know this before. The 68" Sensenich composite ground adjustable props are most
effective between 2200 and 3000 rpm. And 3000 rpm is about the max in my mind for a
68" prop, with tip Mach speed of around 0.81.
The prop and engine rpm ranges for the two drive ratios is as follows:
Ratio Prop Rpm Engine RPM
----- ----------- -------------
2.85:1 2200-3000 6270-8550
2.17:1 2200-3000 4774-6510
The 2.17:1 looks much better for my particular engine and propeller limitations. It
looks like the 2.85:1 would be a good redrive wherewith you wouldn't want to spin the
propeller more than 2400 rpm. I now think the 2.85:1 is much more well suited to
larger diamter propellers.
Scott
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org