Subject: for sale Gear Ratio Change
From: ACRE NL
Date: 8/12/2001, 1:29 AM


Scott, I rode with Jim Mayfield in his 2 place gyroplane quite a few years
ago. He had a 13B with a Ross 2.85:1 drive and put 2 or 3 thousand hours on
it during training flights. It performed quite well. He was at  the Goodyear
airport west of Phoenix. I think he may have had a Warp drive prop, it had 3
or 4 blades I don't remember which. This was before I had even considered  a
building a Mazda powered plane.

Chuck Dunlap

Yes, I have heard and read about Jim Mayfield's gyro.  I don't know what diameter
prop he had.  Also, I'm not sure what the gross weight of his machine was, and what
the rotor blade diameter was.  I suspect it was smaller than my 1200 lb gross
weight.  I may try to contact him and get those figures from him, if he remembers.
Will also ask him how high he ran his engine.  The Warp Drive prop he had probably
absorbed the 160 HP of the 13B NA, but the 200 HP of the 13BT I'm not sure about.

I think the Groen Brothers test location is still at Buckeye, but they will be moving
to the Glendale airport.  (Jim is Groen Brothers chief test pilot.)  There were a few
newspaper articles last week publicizing a new plant being built for them there for
their planned production of the soon-to-be-type-certified Hawk 4 gyroplane.

Chuck, thanks for reminding me about Jim Mayfield's ship.  I do plan, however, to
keep my redrive up for sale.

Scott

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org