Ian & Irene Beadle wrote:
Yesterday for the first time I went to the airfield in good clothes, and
no heap of tools in the wagon, just fuel. Had a great day flying.
Here are some pictures showing the cowling modifications. Note the NACA
air inlet to the manifold and side louvres for hot air out.
The air inlets ducts are all trumpet (bell) shaped on two sides with no
ducts after the radiators. As you can see the inlets to the water rads. are
original size. They have 9" X 10" X 2.5" air conditioner evaporators in
parallel. The oil inlet is 9" X 1& 7/8" with RX7 oil cooler.
Anybody any hints on painting for minimal weight? She has been primed
and undercoated already.
Ian RV6A Downunder.
beadles@webace.com.au
Looks like a good opening for the oil cooler and radatiors. In fact, I see
the same number of cooling fins when I look at the front of mine.
Most importantly it works. I well know what you mean about almost
wanting to celebrate the first time you could go to the airplane and fly it
without doing something to get your clothes dirty.
Jim Mosur's opening for the oil cooler is further aft than mine, and mine is
further aft than yours, but all seem to cool the oil.
Enjoy the flying
Ed Anderson
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org