Was hoping that someone could help me to identify a couple of sensors >

Second,  there is a small sensor that appears to be installed in a oil

passage on the plugs side of the engine.  Its toward the back and can be

seen

in the same pic with the sensor described in the paragraph above.  I

think it

is an oil temp sensor but still not sure.  It appears that this is the

usual

location of a oil pressure sensor on a 13B but I'm pretty sure that this

in

not a pressure sensor.  Again, any ideas would be helpful.  I have not

yet

been able to identify a sensor that looks like an oil pressure sensor.

Thanks for your assistance!!!
Sincerely,
Don Mitcehell

I Believe that the small sensor that you are looking at is the Water temp
sensor.It is located just to the left of a small plug (in your picture) that
is the location for the oil pressure sending unit. I had trouble figuring
out the same thing on my engine.

Dave Smith

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org