Subject: departure from nucleate boiling
From: ACRE NL
Date: 8/13/2001, 9:13 PM

Tom Kendall wrote:

Oh goody!  Something I recognize.  What you all are looking at is something
we in the nuclear power industry refer to as "departure from nucleate
boiling".  It is a very, very bad thing, and one to be avoided at all costs.

Paul, your reference is correct in using the term "vapor".  As in water
vapor.  As in steam.  If there is too much heat going in, and not enough
heat going out, then you get a "pocket".  The pocket may be stable (i.e.
there is a localized hot spot, but surrounding areas have enough coolant
flow to keep it from growing), or it may be unstable and cause the whole
area to flash over into a steam-bound condition.  Very bad as all cooling
effectively stops until you reach many hundreds (thousands?) of degrees
hotter and radiative cooling takes over.  Not good for aluminum, steel, etc.

Russell is quite correct too.  Water vapor is not air.  Air is not the
culprit.

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org