Don Dunbar wrote:
Hi Paul,
Does any one have a Auto-cad file of the series 5 bell housing they
could
send me.
I remember there was a lot of information out there when Leon way
making a
bell housing.
Has anyone heard from Leon?
The bell housing bolt holes on Tracy drawing seem to be different to
my
engine.
Regards Don
If series 5 means same thing as 3rd gen (93 & later) I think the only
difference is that one of the holes is just missing. (this was to allow
mounting the starter on the engine side. The "missing" hole is the one
clockwise from the locating dowel at lower left corner as you are facing the
engine.
Tracy Crook
tcrook@rotaryaviation.com
www.rotaryaviation.com
I don't think that is what series five means. The Aussies change series numbers from
88 to 89 and then again in 93 as I recall.
I'll have to search back through old messages for this.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org