Subject: Evans NPG coolant
From: ACRE NL
Date: 8/14/2001, 9:35 PM

Ken Welter wrote:

I have run propylene glycol piston engines for over 15 years and my
rotary coot for over 900 hrs and would never consider running
anything else. I have just switched to Evans coolant and have about
60 hrs on it and like it so far it boils at 370 degrees at 0 psi and
has 27 percent better heat transfer than water with a wetting agent.

I know rotary road racers that run Evans and say it has stopped the
cracking around the spark plug. The only down side I can see is it
costs 25 bucks a gallon but if it works I think that is cheap.I will
let you know how it is after I get more time on it.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org