"Bass, Jerry" wrote:
Great thoughts. I think the water cooling, i.e.. salt water may play havoc
on the aluminum, cast iron. If you add a heat exchanger, then you are in the
same box we are in, with different sizes, flow rates and even neucleate
boiling.
Jerry Bass
All the marine IC engines that I am familiar with use a glycol/water coolant in
the block and a sea water/coolant heat exchanger. The one I have worked
on the most had a copper tube and plate heat exchanger with an easily removable
rubber end cap to permit cleaning and inspection.
Bill
Long EZ builder & pilot
BSME, MSME
EAA Technical Counselor
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org