Subject: 13B powered lifeboat
From: ACRE NL
Date: 8/16/2001, 9:13 PM


We have not had any instances of sticking apex seals in marine
applications.
I think it is more a function of the load when in operation than the time
that the engine sits. If the engine is only idled or run lightly between
shutdowns, then the seals may be more likely to stick. In marine
applications, the engine is almost always used at high load, even if it is
used infrequently. Thus, the deposits don't seem to form.

Jon Lauter
Rotary Power Marine Corporation
www.rotarypowermarine.com

Perry and I noticed the engine was much cleaner when the EGR was disabled.
I am sure you disable the EGR Jon don't you? Do you use the stock oil
injection
pump?


We don't use EGR. We do use the stock oil injection pump. We run conventional
motor oil. Never had a problem (but I don't dispute that 2 stroke oil for the
seals may well be "better").

Jon

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org