<SNIP!>
As I said several times before guys the bottom line is the thermocouple at
the base of the spark plug. Until we get that kind of CHT data we
are pissing in the wind.
Paul Lamar
Tom Kendall wrote:
OK, Paul, I'll bite. Your assertion sounds on target.
So why don't we have data from a thermocouple (or RTD or thermistor) at the
base of the spark plug? Is it an impossible geometry to place one there?
Is anybody actively trying to get that kind of CHT data?
We went through all that awhile back. No room as the plug is down in a recess.
You need to drill a small hole along side the plug and get a thermocouple
from http://www.omega.com. The hole needs to go to within 2 mm of the combustion
chamber surface. This is an illustration of the way NASA did it awhile back.
This is also the wrong position because it is not the hottest spot in the
rotor housing but
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org