Subject: Evans NPG coolant
From: ACRE NL
Date: 8/16/2001, 10:09 PM


<<  > As I said several times before guys the bottom line is the thermocouple
at
 > > the base of the spark plug. Until we get that kind of CHT data we
 > > are pissing in the wind.
 > >
 > > Paul Lamar

 Tom Kendall wrote:
 >
 > OK, Paul, I'll bite.  Your assertion sounds on target.
 >
 > So why don't we have data from a thermocouple (or RTD or thermistor) at the
 > base of the spark plug?  Is it an impossible geometry to place one there?
 > Is anybody actively trying to get that kind of CHT data?


 We went through all that awhile back. No room as the plug is down in a
recess.
 You need to drill a small hole along side the plug and get a thermocouple
 from http://www.omega.com. The hole needs to go to within 2 mm of the
combustion
 chamber surface. This is an illustration of the way NASA did it awhile back.
 This is also the wrong position  because it is not the hottest spot in the
 rotor housing but
 Paul Lamar


I will be ordering housings soon, and will be putting in the thermocouples as
soon as the Omega manual gets here. It would appear that the best location
would be between the plugs, as close to the leading plug hole as possible,
with the tip of the probe within say .030" of the chamber wall. Is that
correct? If we get invited to the Run Offs I will get video of the gages at
full tilt. (9,300 RPMs). Does that location sound like what you want to see?
Lynn E. Hanover.


You will have to pick a spot in the rotor housing where the outer part
is connected to the inner part. That leaves these two places.
The best and hottest place is right next to the leading plug in this rib.
Rumor has it that late rotor housing have these two bridges or ribs milled
out by Mazda. Please let me know if this is true when you get your new rotor
housings. Perhaps we can insert a small aluminum tube and weld it
in at the top.

Thanks for doing this Lynn. You will be doing all 1000 of us a great favor
by reporting on the temps you see down there.

BTW you will be blown away by that Omega catalog. It is at least ten pounds :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org