Scott Speirer wrote:
Perhaps it has. What is that stuff behind the sun gear? Are those needle
bearings? If so it looks like it already has the required helical gear thrust
bearings. Looks like Chris Ross got the message on this one.
Yes, they are thrust washers and needle bearings, and serve as the helical gear thrust bearing.
Yes that is what I thought they were. Excellent idea on the part of Ross.
May be longer life than either Jerry Bass's idea or the roller bearing that
Tracy uses shown here. If one is good two are better :-)
Perry Mick could use this idea to beef up the stock Mazda thrust
bearing as he is using direct drive.
I think you would be making a mistake selling this Scott. It is near perfect
for a 13B rotary powered gyro. Just use more blades on your 68 inch prop.
You will gain a bunch of thrust as you will have 20 to 25 more HP
at 7500 RPM than you could get at 6000 RPM with a 2.17:1 PSRU.
I know. Let's just agree to disagree on this one.
If my installation doesn't work out with a
2.17:1, you have my permission to tell me, "I told you so." So,
my 2.85:1 drive is still up for sale.
Also BTW there is no need of my coming over there next weekend
as both you and Chuck have sent fine pictures.
Paul Lamar
OK, sounds fine. Maybe we'll meet later on. Copperstate isn't happening this year, but
supposedley next year. Maybe then.
Scott
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org