Subject: Water pumps & conversion factors
From: ACRE NL
Date: 8/18/2001, 11:18 AM

"The pump uses a cast aluminum, closed-impeller design, 
operating at speeds up to 8100 rpm. A pressure rise of 207 kPa 
at a flow rate of 114 L/min. occurs at rated engine speed."

This is an interesting tid bit of information from
the Continental SAE paper on cooling the 350 HP six cylinder
Voyager engine.

In the silly metric system a Pascal is 0.000145 pounds per square inch.
so a kPa or Kilo Pascal is one thousand times that or
0.145 psi. So 207 kPa is 30 psi. Correct me if I am wrong.

BTW Funny they did not re name the meter or the foot after some 
obscure dead French scientist :-)

One liter is .22 gallons so 114 L/min is only 25 gallons per minute.
Very interesting for a 350 HP turbo charged aircraft piston engine.

The stock Mazda pump is 31 to 40 gallons per minute.
BTW the Mazda pump is using somewhat less than 3 HP.
 
Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org