I am working on another article for the EAA
so I need some help from you heat transfer guru's.
Anything incorrect in this fragment?
Anything that could be worded better?
"There is no cooling but air cooling. Ultimately all waste heat
must be dissipated by the air surrounding the aircraft. There
are three main ways of transferring heat. Conduction, convection
and radiation. Conduction takes place within the same solid
while convection happens between a solid and a fluid such as air
or water. Radiation takes place by one object "seeing" another
hotter object. No not nuclear radiation. You can get a sunburn
at the beach no matter how fast the cooling breeze is blowing.
You do not get a sun burn if you are in the shade. This is a
classic example of heat transfer by radiation. We are mainly
concerned with conduction and convection when cooling an engine."
What do they call the amount of heat transferred per unit time
through a given area such as a cylinder wall? Is that called "flux"?
Paul Lamar
Heat flux, yes. A more commonly felt example is an electric
radiant heater - which actually commonly used the correct term.
A sunburn has NOTHING to do with heat transfer. It is damage
to the skin from too much UV radiation, no temp rise need occur.
You can get fried (sunburned) on a cloud-bright day when it is cool.
Sun burn is not "burn" it is radiation damage (again not nuclear).
Bill Freeman
Long EZ builder & pilot
BSME, MSME
EAA Technical Counselor
Bill Freeman wrote:
True Bill but your skin gets hot because the cold air is not heated.
Isn't UV just another frequency?
Is it different from a red hot exhaust heating up the back side of
a radiator?
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org