East Coast Rotary Aviation and Auto Products wrote:

Here's a pic of my 'in progress' single rotor shaft. It took nearly 5 hours
to get to this point since there was a tremendous amount of material that
was removed during cuts that were interrupted by offsets and holes. I cut
all of my dimensions to within ~.030' and turned it over to a professional
machine shop to make the final cuts.
Bruce Turrentine

Glad to see you doing this Bruce. Big market for one rotors.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org