I am working on another article for the EAA
so I need some help from you heat transfer guru's.
Anything incorrect in this fragment?
Anything that could be worded better?
"There is no cooling but air cooling. Ultimately all waste heat
must be dissipated by the air surrounding the aircraft. There
are three main ways of transferring heat. Conduction, convection
and radiation. Conduction takes place within the same solid
while convection happens between a solid and a fluid such as air
or water. Radiation takes place by one object "seeing" another
hotter object. No not nuclear radiation. You can get a sunburn
at the beach no matter how fast the cooling breeze is blowing.
You do not get a sun burn if you are in the shade. This is a
classic example of heat transfer by radiation. We are mainly
concerned with conduction and convection when cooling an engine."
What do they call the amount of heat transferred per unit time
through a given area such as a cylinder wall? Is that called "flux"?
Paul Lamar
Heat flux, yes. A more commonly felt example is an electric
radiant heater - which actually commonly used the correct term.
A sunburn has NOTHING to do with heat transfer. It is damage
to the skin from too much UV radiation, no temp rise need occur.
You can get fried (sunburned) on a cloud-bright day when it is cool.
Sun burn is not "burn" it is radiation damage (again not nuclear).
Bill Freeman
Long EZ builder & pilot
BSME, MSME
EAA Technical Counselor
Bill Freeman wrote:
True Bill but your skin gets hot because the cold air is not heated.
Isn't UV just another frequency?
Is it different from a red hot exhaust heating up the back side of
a radiator?
Paul Lamar
The radiation heat transfer is just the same. It is just what we call
"sunburn" has nothing to do with HEAT. Yes, while you are
getting too much UV exposure which damages your skin (sunburn)
you are also getting some amount of infrared radiation transferring
heat, too. If you are talking heat transfer, don't mention sunburn.
You can get a serious sunburn from an arc welder or UV tubes
with essentially zero heating. Sunburn is cellular damage directly from
the UV, not from any heating.
The red hot exhaust is dumping its heat almost exclusively in the
infrared (IR) band. Ever note that photographer's lights are rated
in color TEMPERATURE? The temperature of the radiating body
controls the frequency(s) that are emitted. Low temps like the
exhaust (red-hot) give off mostly IR, very efficient in heat transfer.
A higher temp source or a plasma'd gas (mercury vapor in flourescent
lights) will give off other freqs. You can get a lot of cell damage at
energy densities in the UV range that raise the temp only very, very
slightly. Both freqs (IR and UV) travel in waves and can be stopped
by any visual barrier. Both are electromagnetic radiation - but sunburn
is not from heat.
Sunburn is cell damage, not heating. Think of "feeling the warmth of
the sun on your face on a ski slope when the air is calm". You are getting
BOTH IR and UV in that case. You will feel the heat from the IR, and
the UV will damage your skin. You get no sunburn (cell damage) from
extended exposure to an electric radiant heater - too low a temp, all IR,
zero UV, but you can feel and benefit from the radiant heat transfer.
Bill Freeman
Long EZ builder & pilot
BSME, MSME
EAA Technical Counselor
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org