Subject: How to cool your wankel
From: ACRE NL
Date: 8/21/2001, 4:56 PM


Russell Kent wrote:

Radiation is the transfer of heat that occurs when energized ("hot")
molecules expel energy in the form of photons (usually infrared light),
and nearby cooler molecules absorb the photons.  It occurs in liquid,
gas, and plasma phases.  [It may occur in the solid phase, but at scales
so small and at temperature gradients so high that you'd need a
well-equipped nuclear lab to observe it.  Basically you have to pump
energy in faster than the solid can either transfer it via conduction or
melting.]


Minor correction to my own posting: the above could be read to mean that solids
don't radiate.  This, of course, is a false interpretation (they radiate from
their surface into other phases).  What I meant to communicate was that
radiation *within* a solid phase basically doesn't happen.  By the time you
pump enough energy into the solid to get it to radiate internally, it has
changed phases.

Russell Kent continued:

"Flux" means flow.  In technical discussions, it means the rate of flow
through a surface (perpendicular to it).  Heat flux (also "thermal flux")
is measured in Joules/sq.meter/sec. or kilocalories/sq.meter/sec. [both
metric] or BTUs/sq.ft./hr [English].

Paul Lamar responded:

And HP per square inch:-)


You mean HP/sq.inch/sec. (must have time).  That's a hack.  It makes as much
sense as Watts/sq.meter/sec. [Both have time in there twice.]

No!
Time is implied in HP and Watts. Hold on a second and I will upload the next segement.

And by the way, I wrote those units all wrong.  They should be (in order):
Joules/sq.meter-sec.
kilocalories/sq.meter-sec.
BTUs/sq.foot-sec.
HP/sq.inch-sec.
Watts/sq.meter-sec.

(My mother, the middle school math teacher, would have chided me for the
error... :-)

Russell Kent

The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org