Subject: How to cool your wankel
From: ACRE NL
Date: 8/21/2001, 4:09 PM


I am working on another article for the EAA
so I need some help from you heat transfer guru's.

Anything incorrect in this fragment?
Anything that could be worded better?

"There is no cooling but air cooling. Ultimately all waste heat
must be dissipated by the air surrounding the aircraft. There
are three main ways of transferring heat. Conduction, convection
and radiation. Conduction takes place within the same solid
while convection happens between a solid and a fluid such as air
or water.  Radiation takes place by one object "seeing" another
hotter object. No not nuclear radiation.  You can get a sunburn
at the beach no matter how fast the cooling breeze is blowing.
You do not get a sun burn if you are in the shade. This is a
classic example of heat transfer by radiation. We are mainly
concerned with conduction and convection when cooling an engine."

What do they call the amount of heat transferred per unit time
through a given area such as a cylinder wall? Is that called "flux"?

Paul Lamar

Paul, I think I would reconsider your wording re: radiation energy.
Radiation energy is most effective at rejecting heat at higher
temperatures and does not require another body to be in close proximity.
Consider the temperature drop in the desert on a clear night with no
wind [no convection or conduction]. The heat loss is directly related to
the radiation loss to a "black" source, the night sky.

I agree with your conclusion, however, that the principle concern is
heat management through conduction and convection.

Jim Holm


 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org