I saw this one on a 1998 Dodge pickup
truck. Talk about large area and thin. Must be 32 inches 
wide by 24 inches high by about 3/4 inch thick. Dodge still 
has not figured out that they need to seal the edge of the hood 
to prevent dynamic pressure build up behind the rad. There is 
one huge fan that goes along with this thing. The overflow and 
recovery tank looked to be about two or three gallons.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org