Subject: Cut down water pump.
From: ACRE NL
Date: 8/26/2001, 2:10 PM


Paul wrote:

The water pump housing does not wear out unless you let the water
pump cavitate. The 15 year water pump cartridge itself is unchanged.

Of course.  I think I will end up following your lead on this.  The
additional pics and comments would be appreciated.  I do have a mill.

This is what the water pump looks like after you cut it off
with a band saw or hack saw. Surprisingly and inexplicably the
big passage is the bypass passage. It does not make sense
to restrict the flow here as all the restriction you need
is in the block and or in the radiator.

The one with the flashlight shinning through
is all the return flow from the block. You hack this partition
out with a die grinder and weld in  a new partition with a
resulting increase in flow capacity out of the block.

Paul Lamar

Paul
Would you mind explaining what and where you add the new partition. Guess I
missed something previously.
Thanks
Roger Robertson
rrrob@arn.net

This should explain it better.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org

new-partition-pump.jpg

water-pump-bv-cutdown.jpg