Subject: Mazda RX7 13B engine bolts
From: ACRE NL
Date: 8/26/2001, 12:38 PM


Hello Airplane Rotary Engine Group:
Below is the respond I got from ARP bolt company, Al Nichols. Does anyone
have a list of the all the bolt/nut sizes/lenghts for the Mazda Rotary 13B,
and 20B engines, that people are using in their airplanes, that I could send
to this Chris Raschke? There was some talk here, a while back, about some
certain engine bolts, not needing to be threaded as far as Mazda did. If you
have any better idea's, please pass the info/drawing on to me, and I will
pass it on to this Chris Raschke at ARP. I will post all responses from him
here. We don't need to bombard Chris with a thousand e-mails from the group.
Thanks.
Rich Gillen

<< Hello Rich,

Yes we do have a website.   www.arpfasteners.com

At this time we do not make any bolts for Mazda RX series.  Chris Raschke is

the person who develops new kits. He may have some information on this

project.  I don't unfortunately.  Any information I have I have given to

him.  His email address is   chrisr@arpfasteners.com

For the Porsche 944 engine we make rod bolts only at this time.  It's

possible we might have studs that will work for the head and mains.  If we

don't have anything in stock then we can make them.  Please let me know what

you would like to do.  Thank you for contacting ARP Specialty Products

Department.

Best regards,

Al Nichols


Alan L. Nichols

Specialty Products Coordinator

Automotive Racing Products

250 Quail Court

Santa Paula, CA 93060

PH:  805-525-1497

FAX:  805-525-1441

EMAIL:  alann@arpfasteners.com >>

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org