Perry Mick wrote:

Is it possible that with older rotary engines the internal oils
seals leak?  My rebuilt engine is using much less oil than
my old engine, even though I still have the oil injection
system.

I started mixing two stroke oil with the gas in addition to
the oil injection.  Just as insurance, and it's easy anyway,
since I usually fill up with two 5-gallon cans from the
gas station.  I just add about 8-10 oz. by volume (cut-off
water bottle) per 5 gallon can of gas. Is this about right?

I think my fuel-sight gauges don't like the oil in the gas,
getting some strange crazing.
--
Perry J. Mick
Duckt N7XR
http://www.ductedfan.com

Perhaps your oil injection system is mis adjusted or not working.

That is a bit much apex seal oil Perry. The usual is one oz per gallon.

Maybe your old oil seal O-rings were cooked. Did John put
the new teflon encapsulated silicon O-rings or the stock Mazda ones
in your oil seals? I am sure he put in new metal oil scraper rings.

I know he put them in the water seal O-ring positions.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org