Subject: 13B tension bolts.
From: ACRE NL
Date: 9/6/2001, 4:58 PM


 Yes we do have a website.   www.arpfasteners.com
 At this time we do not make any bolts for Mazda RX series.  Chris Raschke is
 the person who develops new kits. He may have some information on this
 project.  I don't unfortunately.  Any information I have I have given to
 him.  His email address is   chrisr@arpfasteners.com   
 For the Porsche 944 engine we make rod bolts only at this time.  It's
 possible we might have studs that will work for the head and mains.  If we
 don't have anything in stock then we can make them.  Please let me know what
 you would like to do.  Thank you for contacting ARP Specialty Products
 Department.
 
 
 Best regards,
  Alan L. Nichols
  Specialty Products Coordinator
  Automotive Racing Products
  250 Quail Court
  Santa Paula, CA 93060
  PH:  805-525-1497
  FAX:  805-525-1441
  EMAIL:  alann@arpfasteners.com >>



 Does anyone 
 have a list of the all the bolt/nut sizes/lenghts for the Mazda Rotary 13B, 
 and 20B engines, that people are using in their airplanes, that I could send
 to this Chris Raschke? There was some talk here, a while back, about some 
 certain engine bolts, not needing to be threaded as far as Mazda did. If you
 have any better idea's, please pass the info/drawing on to me, and I will 
 pass it on to this Chris Raschke at ARP. I will post all responses from him 
 here. We don't need to bombard Chris with a thousand e-mails from the group.
 
 Thanks.
 Rich Gillen


  Thank you for trying to save me from bombardment. I have a 13b
 block for making samples, possibly 8 weeks. Unfortunately our show season
 has started and I'm out of the office a lot. It's hard to put a time on
 getting something completed but if you could give some #'s on how much
 demand or need it would help me push the project. Until recently we haven't
 had many requests, so do I make 10 kits or 100, 200? Dealing with one person
 would be more helpful in the beginning. So any info?
 
Thank You Chris Raschke



Hello Chris, 
 I'll pass this on to the groups. I think you need to let us know what 
groups of bolts/studs
your willing to make, and there aproximate group costs. I'm sure many people 
in the RX7 racing
and the rotaryeng airplane group would be interested in this stuff. If anyone 
has some  bolts/studs
they think we need, that I missed, please pass it on to me. Chris, remember 
these airplane engine's
are turning constantly in the 5800-7000 RPM range in the planes, probably 
higher in the racing cars.
So any bolts/studs that take any high stress would be needed. The best way 
people can let you know
their interested in this, is for them to put in the SUBJECT: line of an 
e-mail to you chrisr@ARPFASTENERS.COM
is (Interested in Mazda 13B/20B Rotary ARP BOLTS/STUDS), in the BODY just 
name and address. Then you can
count them all up. Consider me as interested. :) So guys/gals, Chris wants to 
know how many of you are interested.
Please post this on any other RX7 Rotary newsgroups so they can let him know 
if their interested also. Please don't
all e-mail him at once, and flood his box.

I would like to see these made:
--------------------------------------------
engine tension bolts
oil pan  bolts/studs
oil pump bolts/studs
oil pickup bolts/studs
water pump housing  bolts/studs
water pump  bolts/studs
intake  bolts/studs
exhaust  bolts/studs
automatic trans bolts(86-88) Tracys PSRU for the prop uses this automatic 
flywheel(86-88)
alternator  mounting bolts/studs
eccentic shaft pulley  bolts/studs
bearing housing attaching  bolts/studs

Rich Gillen

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org