marc wiese wrote:
This stuff is really getting on in detail and functionality. By the time I
am done with my kit, I will be able to get a $500 all glass, non-vac efis,
eicas type panel with built in battery backup. All I need is a few Compaq
ipaqs for a panel.
http://www.pcflightsystems.com/ HSI/GPS combo using solid state gyros
http://www.xbow.com/ solid state silicon ring gyro packages NEAT!
http://www.icarusinstruments.com/oshkosh.html another backup dg
www.controlvision.com moving map gps
Marc Wiese
I some questions. Is there any standardization in palm type PC's?
It seems that there are a whole bunch of different OS and connectors
so one program or accessory will not necessarily run or work on other
brands or models of palms. I see plug in GPS's that will only work on
certain brands. In some case only on one or two models of the same brand.
Looks like total anarchy out there. What is the most popular O.S.
with the most aircraft software and which palm has the most accessories?
Can I get a GPS and a wireless internet connection on the same palm top
for real time weather?
What do you have to do... buy five different models or brands of palms to
do everything you need to do?
Seems like it would be cheaper to buy one lap top with a bright screen.
Supposedly the NEC lap top has a very bright screen but I have not seen it
yet. The other option is to just put a full blown PC in the airplane
with a flat panel desk top type super VGA screen. They are very bright these
days and will run off 12 volts. Cheap too at about $300. At least all
accessories and software will run on any PC.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org
Paul,
There are a few people offering integrated palm top solutions. If you
like, I'll try to look up the easiest one.
Re using a full computer and bright flat panel, I'm researching that
very thing right now. I intend to use Linux as the OS for reliability
plus there are some excellent debugging tools available for free. I
hope to make a full EFIS with engine monitor for under $2k, not
including programming. Working this right now, but having trouble
finding out engine sensor details.
Which flat panel VGA screens have you found that run off 12V and what
sizes are they?
Thanks,
AI Nut
Most use a wall brick as a power transformer. Out of that comes 12 volts DC in a lot of
cases. The Samsung looked extra bright and it was one of the cheapest.
Over the last 20 years or so, in my computer store, I have had excellent luck
with the Samsung brand monitors. Much better than the Japanese or Taiwan brands.
I have some that are still working fine after ten years.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org