Subject: electric water pumps.
From: ACRE NL
Date: 9/7/2001, 4:54 PM

"Schertz, William W." wrote:

Paul,
Stewart components has a tech-tips area

http://www.stewartcomponents.com/techtip1.htm

that has a fair amount of good information that corroborates a lot of the
items discussed on the list. Some quick examples:

1. A radiator is about 30% open area (for air flow), therefore an air
opening of 30% matches
2. They recommend the largest area radiator possible.  If the surface
area
is doubled, the potential thermal dissipation is doubled.  If the
thickness
is doubled, the heat dissipation increases approximately 25%.

Bill Schertz

Bill
Bloody good site !!
Also saw your questions, I am laughing to myself here because I can just see
their faces as they wonder what the hell you are wanting to do with the
pump.
George (down under)

http://bbs.cartserver.com/bbs/

Bill Schertz  posts regarding: Stand alone waterpump

I have a unique installation of a Mazda 13-B in a custom off-road vehicle that is severely space constrained. The stock water pump sticks up too much,
  and I am interested in a water pump that could be attached to a custom bracket, and then plumbed into the inlet and exit to the stock block. I know your
  pumps are not orignally set up for this, but could a plate be made to fit on the back of the pump, and allow it to function in this application? 

  Posted From: 146.139.76.128

Jack Wilson  posts regarding: Stand alone waterpump

   Bill, we now have an electric inline water pump that should be perfect for your application. You can check it out at www.emp-corp.com Please let us
   know if this may interest you..Thanks 

   Posted From: 207.144.143.21-- 

Bill Schertz  posts regarding: Stand alone waterpump

    Jack, The pump at that link draws 8amps at 12 volts, which is 96 watts. I don't think that it will have the flow capability to cool the engine making
    160-180 horsepower on a steady state basis. your other pumps at 50-70 gpm seem to draw .77 to 1.8 horspower (266-622 watts) which would be
    ~50amps. 

    A drag racer has a short burst of power, and then time to cool off, my application needs to be considered continuous duty. 

    Posted From: 146.139.76.128

******************************************************************************

Silence? :-)

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org