Subject: Beading tubing. How to.
From: ACRE NL
Date: 9/11/2001, 8:31 PM


We have been knocking ourselves out for the last three years
trying to figure out how to do this for coolant tubes
and so fourth. I found this technique in an old Northrop Aeronautical
Institute A&P text book dating from 1948.

The two lower blocks are split to firmly clamp the tube around
the inner steel guide pin. This can be done with large bolts.
The whole works is put in a hydraulic press and the top block is squished
down to form the bead. A separate tool will have to be made for each size
tubing and wall thickness. But we can make one and ship it around to
those that need it. T zero tubing hardness will probably work best.

Paul Lamar


Hi all:

Yeah, all the surplus Parker tube beading kits from WWII - on  have dried up -
I've been looking for quite awhile for one. I thought Earl's Supply
was making single size tube beaders now...

Regards,
James

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org