Jerry Hey wrote:

I have mounted the stock Mazda oil cooler on the fire wall, with the
inlet/outlets on the passenger side. The Haynes manual does not
have a diagram showing how the oil is routed within the engine.  So
where do I connect the oil inlet hose?  Same question for the outlet
hose.   Also, do you recommend removing the oil cooler bypass valve?
(The oil metering pump has been removed.)    Thanks,  Jerry

You got a little sketch or picture Jerry?

If you remove the oil thermostat in the stock cooler you must plug
the bypass hole inside the cooler. 

The oil metering pump has nothing to do with any of this.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org