Hi Paul;
With all of the theory expounded, I have not heard of any concidering
vibration witch contributes greatly to catastroffic failures . that were
happening in many avenues of aviation encluding military, commercial , racing
and g/a. Please advise to include that before they expound their wares to
ones who don't go far enough in their wisdom
RJNSR
That is a good point. Torsional vibration has killed more
than one prop. The rotary has the same number of torque pulses
as a four cylinder A/C piston engine but they are not nearly as severe.
2700 RPM 200 HP for the piston engine. 6000 RPM 200 HP for the rotary.
Less than half the average torque and over twice the RPM for the same HP.
When you feed this through a 2:1 gear box there are twice
the number of torque pulses per prop revolution with surprisingly
way less peak torque amplitude than a four cylinder piston engine
of equivalent HP.
The worst possible engine for a prop is a Lycoming IO-360.
Paul Lamar
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org