Dick Gregory wrote:

Hi again,

What modifications will I need to make on my radiator? I realize that I need
different hose fittings. Is this something that I will be better off getting
done locally or having the supplier do? What specific fittings, hoses, etc.
are recommended by those of you who are engineers, or who have done this
already?

Is it best to block off the filler neck or put a cap on it?

Any changes to the drain valve?

What works best for the overflow/recovery tank? Is it an Auto parts store
item?

Dick Gregory
LongEZ N613NC
Houston, TX

Here is a very good example of the AN hose approach.

Is it best to block off the filler neck or put a cap on it?

I would block off the filler neck on the rad and put the pressure
cap at the highest point in the system. In fact this is absolutely
essential for proper operation of the cooling system.

Paul Lamar
 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org