Subject: twin rotary LEZ?
From: ACRE NL
Date: 9/20/2001, 11:27 PM


Don Forsman wrote:

Paul, here's something that came up on the canard aviators list.  Does
anyone know any more about this one?

I heard a rumor that someone made a twin (piston powered) Long EZ,
but I can't find any evidence to substantiate that.  Does anyone know
anything about it?<<

It's a fact; it was made by Ivan Shaw - the guy that is behind the Europa
kit plane and the Liberty. It started with 2 Hewland 2-stroke engines
and he then changed to two Norton rotaries (now taken over by Midwest
which is a German company who has certified the engines for aircraft
use). The space used by the original engine was used for a particularly
innovative main gear retraction.

I believe I saw that this aircraft has been recently refurbished (the
conversion was done way back in the eighties) and is for sale.

There is also one in France using the Midwest engines. Check the ACRE NL for a
picture.

Paul Lamar

There was a canard  powered by two Metro/Isusu engines (I think) with belt redives

each driving a seperate contra rotating prop. It flew into Sun N Fun from South
America a few years past. Interesting point, they stated that with one engine
shut down it flew just fine , apparently little loss from the stopped prop. I was
encouraged because I have often thought about two engine common centerline
combination ( drew up and ran some numbers on a "Baby Red"  Reno design
with big V8s - long before Paul's twin Mazda, and also a mid twin engines, front
prop
sport plane - I would like the pilot to see the ground, and I do not care for
pushers or cnards) - Vance


The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org