We had a discussion on this at Rotormotor.
For those that don't want to use the rubber bushing in the
firewall (trick see the jpg) we are trying to come up with a simple
motor mount scheme.
What is the dimension from the upper motor mount hard point
on the Long EZ firewall to the top of the fus?
What is the dimension from the lower motor mount hard point
on the Long EZ firewall to the very bottom of the fus?
See the gif.
I think at this point it will be easier to change the hard points
on the firewall.
Paul Lamar
Paul,
I've been doing a lot of thinking about the narrow firewall engine mount
problem. Long-EZ and RV-4 people all have the same problems. What we need is
a mount that will work on various narrow firewalls. Talking to you this past
weekend about the beam style mount incorporated in the P51 got me started in
the right direction. I think that I have a solution. If we use a
compression/tension beam with a diagonal tension member for vertical loads
that mounts to a bracket on the firewall we can solve a lot of the problems.
The bracket can mount to various hard point configurations, and can be
easily customized for different aircraft. The tension member can be tubing
with rod ends so it can be adjustable for each installation. The
compression/tension beam and engine mounts can be the same for all the
different applications. The lateral loads can be taken care of with a
diagonal under the engine. This would work for both types of aircraft. A
structure where all members are in either compression or tension is the most
efficient type of structure. By taking the bending loads out by using rod
ends and pivot type connections, it should be lighter than an equivalent
welded space frame. It would also take up much less space than a welded tube
type mount. We could literally produce a kit with the right parts and you
just cut a few things to length, drill some holes, make a few simple welds
and bolt the thing together. I know this is hard to visualize, as soon as I
have the chance I will draw up a sketch and send it on.
Monty
The AirCraft Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org