Peter Cowan/Lexi Cameron wrote:

The engine is working well. Initial full power runs were up to 7500 rpm

but

with a larger prop top rpm is down to 5500. Since I'm using an older

Volvo

outdrive that probably never ran over 5000, I'm happier with this speed.

My

speedometer now pegs at 24 knots (this is a heavy low speed hull). The
original 150 outboard never got it this fast. Plan to do some gps runs
later.
It is a real treat to not have to worry about cooling and noise. The

stock

water cooled, underwater outlet does the trick.
Idling is now fine at 800 rpm but there is some hesitation going up

through

about 1500 and occasionally seems to fire on one rotor at lower rpm.
Peter.

Good morning! What year engine and model and which ignition system do you
have?. Yvon Cournoyer.

 
The AirCraft Rotary Engine NewsLetter.              Powered by Linux.
ACRE NL web site.
http://home.earthlink.net/~rotaryeng/            http://www.linux.org